Analytical Technology A15 Spezifikationen PDF herunterladen (Seite 8)

O&M Manual

Rev-H (8/11)

Part 2 – Mechanical Installation

The main installation requirements for ATI’s Turbidity Monitor are mechanical installation, and

connection of power to the monitor. Figure 1 on page 5 shows a schematic of a typical installation of a

complete system. The monitor should be located near the sensor in order to use the standard 30 foot

sensor cable supplied with the system. Longer cable runs can be accommodated using a junction box

and additional 7-conductor cable.

Figure 2 provides details on the mechanical installation of the standard panel mount electronic

assembly. The panel cutout must be made accurately as the cutout tolerance is small. Panel mounting

brackets are included with the monitor and are attached as shown below.

MOUNTING BRACKETS

(TYPICAL 2 PLACES)

MOUNTING BRACKET INSTALLATIONPANEL CUTOUT

3.60"

91.4mm

3.60"

91.4mm

Figure 2 - Panel Mount Monitor Dimensions & Installation

6.10"

155mm

5.46"

139mm

.34"

8.6mm

3.54"

90mm

3.78"

96mm

SIDE VIEWFRONT VIEW

3.78"

96mm

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Keine Kommentare

Analytical Technology A15 Spezifikationen Seite 8